Designed to operate on 220V A.C. mains, 50Hz. Consists of E & I laminated cores, alloy stand, one primary coil & two secondary coils to produce 6V and 12V at 2A can be mounted one by one, over the primary coil. The mains coil is provided with 1meter of two core cable and secondary coils are mounted with 4mm socket terminals. transformer unit can be easily mounted or demounted the to get a 6V or 12V power supply as per requirement.

All parts are clearly visible, works on 4-6V, D.C. Mounted on wooden board with two 4mm socket terminals.

With wheel, to generate alternating current (A. C.) and direct current (D.C.) represented by two lamp holders and bulbs marked A.C. and D.C. with the help of driving wheel. Mounted on polished wooden base.

With hand wheel, to generate alternating current A.C. and direct current D.C. represented by two lamp holders and bulbs marked A.C. and D.C. with the help of driving wheel. Mounted on a moulded plastic base.

Enables students to investigate nature and properties of electricity by using simple circuits which are easily constructed on a base board. The connector system uses p.c.b. strips with cut-out sections whose ends can easily be inserted in spring terminals, ensuring low contact resistance and ease of connection. The following components are supplied with each board. 20 Flash lamp bulbs, 1.25V, 0.25 A, 9 Connectors with lamp holder, 12 Plain connectors. 1 connector with 4 mm plug and crocodile clip, 2 mounted bell pushes, 2 soft iron nails, 0 mm square head, 1 length bare copper wire 20 swg, 1 length bare Eureka wire 43 swg, 1 length plastic covered copper wire, 1 piece copper foil, 1 piece steel wool, The standard pack is one complete set detailed above, sufficient for two students.